1) What version of RTCM firmware are you running?

2) What do you have your TxBufferLength set to (in the RTCM) ?

Jim

Date: Sun, 11 Aug 2013 19:43:36 -0500
From: mhebert1975@gmail.com
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] RTCM simulcast help

All,

I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up 

I have done a astres.sh and rebooted both RTCMs

Here is my voter.conf

[general]
port = 667
buflen = 120
password = xxx

[28304]
KD5DFB_main=xxx,transmit,master
KD5DFB_site1=xxx,transmit


Here is my menu 98 on the RTCM 

GPS Lock: 1
Connected: 1
COR: 1
EXT CTCSS IN: 0
PTT: 0
RSSI: 255
Current Samples / Sec.: 8000
Current Peak Audio Level: 1496
Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134
Current Time: Mon  Aug 12, 2013  00:40:50.800
Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec
Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec
Last Rx Pkt index: 0, inbounds: 0


_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users