Thank you very much, this example answers my question exactly. I will test and play with it and see how it works for my situation.

On Fri, Jul 22, 2016 at 1:34 PM, Pierre Martel <petem001@gmail.com> wrote:
on commercial radio there is usely an option for busy channel to prevent tx. Some ham radio also have it


Le vendredi 22 juillet 2016, Bob Pyke <k6ecm1@gmail.com> a écrit :
Sounds like you want the repeater to open for any, or a subset of PL tones, the broadcast the received tone. If you get it to work, what do you expect to happen when multiple folks use the repeater at once? They won't hear each other unless two are using it at once. There Is still only one audio path through the repeater.

Thanks,
k6ecm
73
Sent from my iPhone

> On Jul 22, 2016, at 8:29 AM, Joe Moskalski <kc2irv@gmail.com> wrote:
>
> I have a need to setup a community repeater. This is done easily with a shared repeater tone panel and the like from CSI. I was wondering if this could be accomplished using app_rpt. All it would need to do is allow the use of multiple input and output PL tones. Simply put, when the repeater receives X pl tone it transmits the X pl tone on the output and when the repeater receives Y pl tone it transmits the Y pl tone on the output.
> If anyone has done this or has any idea on how this would be accomplished it would be much appreciated.
> Thanks in advance!
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.