I have my node configured as a remote base node and when it is connected to another node, and the other node does a PLAYBACK, the remote base hears it and retransmitts it. Is that normal??On Mon, May 2, 2016 at 4:24 PM, Corey Dean <n3fe@repeater.net> wrote:If it was actually in remote base mode it wouldn't do this...
Sent from my iPhoneWhen I do a playback from another LOCAL node, (sharing the same rpt.conf), the remote base will play the audio file over it's transmitter. I was able to solve this problem by disabling the transmitter for the duration of the script so that it does not play any of the telemetry when switching channels.Modifying app_rpt.c to replace "RPTENA" with "" and then recompiling asterisk did solve the issue so it won't announce anything when I re activate the transmitter.
73Skyler KDØWHBOn Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer@gmail.com> wrote:Are you sure you need to disable the TX? I'm pretty sure none of the telemetry comes out of the remote side.On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440@gmail.com> wrote:_______________________________________________Is it possible to disable the T X E N A announcement when re enabling the transmitter? I have a script which disables the transmitter and re-enables every time that I switch channels on my remote base. It is sort of annoying that it goes throughout all links that have telemetry enabled.Skyler
73
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.----Tim
--_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--