Can the DNS make it appear to not even
find the connection, as though the cable is not connected? The response I get
(or lack of) looks like it would if the cable were not connected. Looks like I
have a bunch of things to try.
Thanks all,
Bob
kk6ecm
From: Tim Sawyer
[mailto:tim.sawyer@mac.com]
Sent: Sunday, May 04, 2014 8:25 PM
To: Willem Schreuder
Cc: Bob; app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users]
Finding older version of ACID
I also use ‘setup’ to set a static IP address. But setup hammers
/etc/resolv.conf so I just go edit i.e. manually. Should look like so for
google dns, use others if you prefer:
nameserver 8.8.8.8
nameserver 8.8.4.4
--
Tim
:wq
On May 4, 2014, at 7:49 PM, Willem Schreuder <willem@prinmath.com> wrote:
On Sun, 4 May 2014, Bob wrote:
After the ACID load is complete, using a DHCP router, I run
"setup" from the
command prompt, and configure it manually, IP, netmask, gateway, and DSN.
When I do this on a WinXp machine in the TC/IP window, connects directly to
the public (static) IP just fine. When I do it on the Linux box with ACID,
eth0 can't find the connection.
Bob, what you are doing seems correct. I tend to manually edit files, but
there is nothing wrong doing it from 'setup'. Bottom line, there is
nothing in ACID that prevents this from working. I think you probably
just have some field wrong somewhere.
I would approach it bottom up - try pinging the from the AllStar computer to
the gateway using IP addresses, then using a symbolic name to test NDS, and
work your way up. I bet you will find some subtle misconfiguraton
somewhere is causing the problem.
73 Willem
================================================================
Dr. Willem A. Schreuder, President, Principia Mathematica
Address:
Tel: (303) 716-3573 Fax: (303) 716-3575
WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to the
list detailing the problem.