Hello,
This is an old thread, but I failed to see it until now. I have
been using a Baofeng BF888S and also a UV-5R with a URIx from DMK
Engineering for over a year.
The wiring is pretty straightforward. COR can be obtained from an
audio chip inside the radio. For the UV-5R it is documented here:
http://alaskareflector.org/zl1nc/UV-COS.html
On this page you can see where to get COS from a Baifeng BF888S
http://kp4tr.org/?page_id=335
On 6/11/2014 3:20 PM, Steven Donegan wrote:
I am looking for a circuit diagram so I can fabricate
a cable to connect a URIx to a Baofeng (or pair of
Baofeng's) suitable for use with ACID/Allstar. Any
assistance would be useful. I have not found anything on the
web thus far...
____________
Steven Donegan
KK6IVC
SSCC/NORC Life Member, Car #86
www.sscc.us
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.