Do you have a buffer from the 3.3v to 5v logic?

--
Bryan Fields
M: +1-727-409-1194

On Jun 3, 2018, at 18:27, Scott Weis <kb2ear@kb2ear.net> wrote:

I'm trying to set up channel steering for a Motorola CDM1250 and have the
radio working without a URI. If I ground the channel pins the channels
change on the radio fine.  Now when I connect the pins to a URI-x gpio1
gpio2 gpio5 and gpio6 It dosent seem to work. I have gpio1=out0 ,
gpio2=out0, gpio5=out0, gpio6=out0 and when I do a *584=cop,61,GPIO5=1 or
*585=cop,61,GPIO5=0  nothing seems to change on the URI, either state I see
+5v on the URI. Should it not get pulled to ground?

Am I doing something wrong?

Thanks & 73
de Scott KB2EAR

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.