link not broken, just missing a space!

http://ohnosec.org/drupal/node/177



Envoyé de mon iPad

Le 2014-02-09 à 00:02, "Jim W7RY" <w7ry@centurytel.net> a écrit :

Thanks but the link is broken.

73
Jim W7RY


On 2/8/2014 8:04 PM, K&R Yoksh wrote:
Geez, sorry to waste your time with a reply, Jim. Do you already know how to use Google?http://ohnosec.org/drupal/node/17773,KyleK0KN--- Original Message --- I already know how to build a simple transistor switch....

How do you set up Asterisk to use the parallel port? What commands where?


73
Jim W7RY

On 2/8/2014 1:34 PM, K&R Yoksh wrote:
Hello Andrew,

In case George doesn't have anything written up for parallel port
operation:
http://www.qsl.net/k0kn/plri.html

There are several circuits detailed here, from the simplest discrete
transistor type, to a transistor IC type that can support multiple
radios.

You can also use an off-the-shelf IRLP board, should you have one
laying around. The DTMF decoder is not supported by Asterisk (Asterisk
uses DSP techniques to decode DTMF), so I dropped the MT8870 from my
schematics.

At it's simplest, all you'd really need is one NPN transistor for PTT
(active high from parallel port, active low to activate PTT), and one
PNP transistor for COS (if active high from radio). If your radio uses
active low COS, I'd buffer with two transistors (PNP to NPN), rather
than directly connecting the radio to the PC.

I'd suggest using active low at the parallel port inputs.

73 and good luck.

Kyle
K0KN
Allstar 2210-2219


--- Original Message ---

Hello George,

Do you have it documented anywhere how you configure the parallel port
for
COR and PTT? I'd love to see how you have it configured?

Thanks!

On Saturday, February 8, 2014, George Csahanin <george at dyb.com> wrote:

 I bought some CM108 fobs on EBAY for $0.99 each. He has a s***load of
them. Not knowing if they'd be real CM108 I waited till I got them to
send
this note. The USB ID is 08dc:000c the real thing.

The last four nodes I built up use D945 motherboards which have parallel
ports, which I use for COS/PTT and the USB fob only does audio. No
need to
modify them for PTT and COS, etc.

Anyhow, the EBAY auction is 300503465055 OR click this
link<http://www.ebay.com/itm/300503465055?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649>

Seller's store is circle607. They're in Hong Kong. But the postage was
under $1.20 for all ten.

I stocked up simply because they work so well, cost so little, and not
sure when they will stop being available. (hoarding 101)

GeorgeC
W2DB
Allstar 2360

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
down to the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message
to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.