On Wed, Feb 14, 2018 at 11:47 AM, Steve Mahler <kizzy@lusfiber.net> wrote:
Did you remember the ssh port is 222 vice 22 ?
...STeve - KF5VH
On 2/14/2018 10:04 AM, ARS W5OMR wrote:
So, here's the update.
I re-wrote the SD card, booted the Pi, text started scrolling on the screen, the ACT LED is lit, the ethernet port LED's are lit, it would appear that the .img loaded and the machine booted up. Then, the video disappeared. The Rpi3 is still lit as well as the ethernet port. "Ok. I can get around that. I'll just ssh into the dang thing!" (he said, not realizing his oncoming frustration)
The frustrating part - I tried, for the longest, to remember the login credentials for the cable modem to no avail.
So, I did an 'arp -a' and found the mac addresses for those connected devices on my network.
The only other address that responds to an 'ssh' command, other than this machine (at .106) was one at .103. However, try as I might, the password "debian" (sans quotes) is not recognized. The peculiar thing is, .103 didn't show up in the arp -a list. (head-scratch)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists. allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ To unsubscribe from this list please visit http://lists.allstarlink.org/rpt-users cgi-bin/mailman/listinfo/app_ and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"rpt-users
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
