It is a setting in /etc/asterisk/rpt.conf:

eannmode=3 ; Default: 1 = Say only node number on echolink connects

; 2 = say phonetic call sign only on echolink connects

; 3 = say phonetic call sign and node number on echolink connects

Monty

On Wed, Jul 11, 2012 at 11:22 AM, pete M <petem001@hotmail.com> wrote:

Is there a way for a node to specify the call sign rather then the node number whe they connect from echolink? ( I am using the acid distro)

If someone connect by the portal we can hear that ve2xx conected, but from the echolink we will hear node 12345 connected..

And where can I write information, like on echolink, that describe the repeater and stuff..

And finally is there a how to for the echolink part, did not found much..

Pierre

VE2PF

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users