Duane,
It can be done rather easily on a per need basis. It is not the default configuration. I can supply pretty simple instruction to recompile with the notch enabled.

73, Steve N4IRS

On 5/2/2016 11:09 AM, DuaneVT . wrote:
Does anyone know if the current compiled app_rpt has the "rxnotch" capability? I have remote receivers linked back with CWIDs set for the same tone. Alone, CWID is transmitted back to the voter without PL tone, so they don't bring up the repeater transmitter. HOWEVER, if the user IS talking when the link transmitter sends its ID, it will come through. Having RXNOTCH might remove the fixed CWID tone frequency from going downstream to the network/user. 
If RXNOTCH isn't currently compiled, could that be done easily for users looking for this fix?
Thanks,
Duane  KA1LM  #42996


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic