Also if as per my previous post is working but you cant get you node to connect to another, remember it takes about 10 to 15 minutes before you node info get pushed out to all other nodes. at that point you should be able to connect.

That assumes you node is reporting correctly first. Check the Allstar node list to see if its reporting. what node number is it/?

Jon VA3RQ

On 10/25/2015 12:39 PM, Russ WL7LP wrote:
I have downloaded the Rasp-Pi 2 img. it installed 4 times just fine.
however, I can not connect it to anything there seems to be nothing
in asterisk -R  once in the CLI prompt doing a ? mark products nothing
no menu at all. has something changed to connect a node from the
CLI command prompt?
 
73 Russ WL7LP
Alaska Morning Net - Net Manager
IRLP node 7369


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.