Simpleusb has nothing to do with RTCMs. You should not have a simpleusb.conf on your system if your only interface is a RTCM. 

When you have set the RTCM COR type = 1 the squelch tail comes from your radio, or rather the Doug Hall voter in your case. As far as I know there is no STE setting anywhere in app_rpt or any of it’s channel drivers including chan_voter.

Have you considered connecting RTCMs to your receivers and let them vote in place of the Doug Hall?

--
Tim
:wq

On Apr 20, 2014, at 12:53 PM, Sam Nabkey <sam.nabkey@gmail.com> wrote:


Hello all...

I have replaced a repeater controller with a RTCM and a  server.

All is well but for a heavy squelch tail after carrier drop.  I am using the unit in simple mode because  I do not have an active discriminator output because I am using the RTCM behind a Doug Hall voter.

I have Googled the subject to death and I see plenty of mentioned items regarding simpleusb and usb settings but nothing on voter configuration.   Am I missing something someplace?

Thanks in advance for all the information.

You all are some of the smartest folks I know.  

Sam K8SN

   
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.