SSH: I assume you restarted the sshd after changing the port or reboot the allstar box either way - /etc/rc3.d/S55sshd restart 
should do it.

Btw what is the trick to getting uLaw files via Audacity?

Courtesy tones, have to look under the [Telemetry] section
and change the freq/numbers there -
in /etc/asterisk/rpt.conf

do you have the line in rpt.conf?

<node> = radio@127.0.0.1/<node>,NONE

And the one in /etc/asterisk/iax.conf
register=<node>:<secret>@register.allstarlink.org

Assuming the port 4569 is setup correctly, can you connect from the allstar dial in # from any std telephone? 



"Got Root?"

How many software engineers does it take to change a light bulb?
None. It's a hardware problem.


Unix is user friendly. It's just very particular about who it's friends are.
WINDOWS: Will Install Needless Data On Whole System
MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.


A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."



On Fri, Apr 18, 2014 at 7:14 AM, Skyler F <electricity440@gmail.com> wrote:
Hello,

I am new ham in high school, and finally got a little SIMPLEX repeater up and running.

My first question

 Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required.

First, I Changed the port 222 to port 22 on the SSHD_Config file

We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root@10.0.1.1, and I got a connection refused.

I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused.
 
After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success.

Are there any suggestions on getting this to work?

Second question: Courtesy tones,

I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing.  Where would the courtesy tones be located, and under what file name?

Third question: why it wont work on the web transceiver

When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571 ,on saddle back mountain.


Last Question: Won't connect to 28298 or 28299

This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone.  He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver.

Thanks
Skyler KDØWHB

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.