I miss typed that port but I figured you know what I meant. Check your firewall to allow your 4569 port through it, not 2369.

No, you are not registered.

Check your iax.conf for error type error bad password etc

register=48654:pass#@register.allstarlink.org

You will not be able to connect inbound or outbound until the node is registered.

...mike/kb8jnm




On 12/14/2018 9:03 PM, cnovey wrote:

Never used 2369 before- but I added it both TCP and UDP- nada

Match port in web portal? Dug around in there- didn’t see anything

 

I did notice this:

 

Node 48654

Main Stats Page

Node 48654 is no longer in the database

 

From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike
Sent: Friday, December 14, 2018 5:43 PM
To: app_rpt-users@lists.allstarlink.org
Subject: Re: [App_rpt-users] connection failed

 

If everything thing else is the same, as in you have made no changes in IP, port etc...

1- check your firewall for your current port through of 2369

2- Make sure your /var/lib/asterisk/rpt_extnodes is up to date and check permissions/ownership on the file.

or...

it is probable your port is blocked by your new ISP.

Try setting your iax port to2370 or 4570.

Don't forget to match that port at the allstarlink portal as well in iax.conf/rpt.conf.

Just my thoughts. But you did not mention connect to what... outbound connections is what I assumed.

...mike/kb8jnm

 

On 12/14/2018 7:24 PM, cnovey wrote:

Hi-

Moved to another QTH- hooked up my Pi and set ports to forward as I had previously. I can connect- see Allmon, etc- but connections always fail- whether from Zoiper or from iaxRpt on the PC.

 

Here is an excerpt of status while I tried to connect to a node:

 

    -- Executing [48654@zoiper:9] Rpt("IAX2/kk6qms-8612", "48654|Pv)|KK6QMS") in new stack

  == Spawn extension (zoiper, 48654, 9) exited KEEPALIVE on 'IAX2/kk6qms-8612'

    -- Call accepted by 173.82.59.253 (format ulaw)

    -- Format for call is ulaw

    -- Hungup 'IAX2/173.82.59.253:4569-4483'

    -- Hungup 'DAHDI/pseudo-1029768121'

    -- Hungup 'DAHDI/pseudo-1580665299'

 

Any help appreciated-

Clifford – KK6QMS



_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
 
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.