Login to the RTCM (telnet) switch 12 'ext ctcss' to 1 or if it is 1 set it to 2, 

Menu 13 0 or 1 ie. reverse the value it is set to, either one should work depending on if you are using them for voting/using COR output from the repeater etc... either way that's one method... 

doing it from DTMF, not sure - 

73's

Mark KC7DMF

"Got Root?"

How many software engineers does it take to change a light bulb?

None. It's a hardware problem.

Unix is user friendly. It's just very particular about who it's friends are.

WINDOWS: Will Install Needless Data On Whole System

MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.

A ntennas
P oorly
P laced
L acks
E ngineering

The best way to accelerate a computer running Windows is at 9.81 m/s².

"I get paid to support Windows, I use Linux to get work done."

On Fri, Jun 6, 2014 at 4:17 PM, Bryan Fields <Bryan@bryanfields.net> wrote:

On 6/6/14, 7:07 PM, Johnny Keeker wrote:
> in CLI type
> radio key
> radio unkey
> but, radio active usbxxxxx     xxxxx being your  node number must be set to the node radio your wanting to key.
> example
> radio active usb 27100
There is not a radio command in asterisk.

also I'm using a RTCM, not a usb interface.

Thanks,

--
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.