Very good. Since I’m using the same
USB device, can I just copy over the settings for simpleusb? Trying this
approach because I discovered PL was generated in the radio.
Thanks,
Bob
kk6ecm
From:
hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton
Sent: Saturday, April 26, 2014
9:54 PM
To: Bob
Cc: app_rpt-users@ohnosec.org
Subject: RE: [App_rpt-users]
usbradio to simpleusb
simpleusb as its name implies
depends on the radio to do much of the work. The PL for RX and TX must be in
the radio. The radios squelch is used. So just worry about what needs to be
setup in simpleusb.
You need RX and TX audio, PTT and
If you can use simpleusb it works very well. I use it exclusively and so do
many others I know who run Allstar. Probably the reason more people don't run
it is because usbradio is the default config and it requires a
73 Doug
WA3DSP
http://www.crompton.com/hamradio
From: kk6ecm@gmail.com
To: app_rpt-users@ohnosec.org
Date: Sat, 26 Apr 2014 21:15:01 -0700
Subject: Re: [App_rpt-users] usbradio to simpleusb
When moving from usbradio to simpleusb, I noticed there are
more inputs in usbradio_tune... compared to simpleusb_tune. What is the
usbradio “rxvoiceadj,” and why is it not used in simpleusb?
thanks,
Bob
kk6ecm
_______________________________________________ App_rpt-users mailing list
App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the
"Unsubscribe or edit options button" You do not need a password to
unsubscribe, you can do it via email confirmation. If you have trouble
unsubscribing, please send a message to the list detailing the problem.