Hello Darrell, Did you resolve your issue?

Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."

Thomas Jefferson

On Mon, Jul 15, 2019 at 7:43 PM Bryan Fields <Bryan@bryanfields.net> wrote:

On 7/15/19 10:32 PM, Darrell Black wrote:
> I have a node behind my NAT router (50026):
> 192.168.1.250
> port 4569 allstar
> port 5198-5200 echolink
> port 5201 supermon
> The above all works!!! The echolink and allstar can accept connections from
> outside

https://wiki.allstarlink.org/wiki/Two_Servers_Behind_NAT_Router

You have to configure each node for the other's node number in the [nodes] stanza.

This is due to the IP for your nodes in extnodes being the public IP. This
means node 49267 will try to connect to the public IP for 50026. You need to
set this up so it knows the direct private IP connection.

Technically some routers can be configured to permit this, but most don't.

73's
--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.