That's right.  It's an old bug. Only one [morse] stanza will work.

On Tue, Jan 30, 2018 at 11:20 AM, Bob Pyke <k6ecm1@gmail.com> wrote:

Same here. It seems to respond to the fist [Morse] stanza.

Thanks,
Bob
K6ECM
73

> On Jan 30, 2018, at 10:25 AM, ars.w5omr@gmail.com wrote:
>
> I ran into that years ago. There's only one stanza on a machine in rpt.conf for all nodes on that machine, as far as the CW ID is concerned.
>
> You 'can' define a voice ID on the 'other' node and have it default to CW when in 'polite' mode, but it will revert to whatever is in the CW ID stanza.
>
> 73 = Best Regards
> Geoff/W5OMR
> (29655/56/57)
>> On Jan 30, 2018 04:18, Bryan Fields <bryan@bryanfields.net> wrote:
>>
>>
>>
>>> On Jan 30, 2018, at 00:12, STAN SIEMS <ssiems@mycns.net> wrote:
>>>
>>> I am running 2 nodes    1994 and 1996 on this server with programed as below cw Id is good on mode 1996  not good on 1994 if I change the node number [morse1996] to [morse1994]  the problem reverses to the other node.Does this file need to be duplicated for both nodes?
>>>
>>> ; Morse code parameters, these are common to all repeaters.
>>> ;
>>> [morse1996]
>>>
>>> speed=20
>>> frequency=800
>>> amplitude=4096
>>> idfrequency=750
>>> idamplitude=1024
>>
>>
>> How is your node configured?  You need to reference the Morse stanza in both node stanzas.
>>
>>
>> 73
>> --
>> Bryan Fields
>> M: +1-727-409-1194
>>
>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--

Tim WD6AWP