Thanks very much, Tim. I'll look into that.

From: Tim Sawyer
Sent: ‎24/‎08/‎2015 19:30
To: David Osborn
Cc: app_rpt mailing list
Subject: Re: [App_rpt-users] Node Details

The Allmon program that collects node information is called astdb.php and it should be in the html directory where Allmon is installed if you are using ACID. I think Rpi2 distro puts it some where in the path. 

Normally astdb.php is run from crontab once a day but you can run it from the cmd line if needed. There is no cash to clear. 

On Mon, Aug 24, 2015 at 10:02 AM, David Osborn <david.osborn@manx.net> wrote:

Hi All,

 

My node 2484 (we were early adopters!) was used for a while as a test node and was set-up accordingly in the portal.

 

It has since been re-assigned to GB3IM-P and the portal duly updated, however the details that AllMon – running on node 2480 - is picking up are still the old ones. The AllStar status page correctly shows Peel, Isle of Man but Allmon is clinging on to the old data (GD4HOZ 70.3625 Isle of Man, Great Britain).

 

What change have I missed to get the correct data to display? Is there a stash of data that needs clearing?

 

TIA

 

David

GD4HOZ

 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



--
--
Tim