When talking from  echolink to asterisk    the audio appears to  drop completely out enough to   make the courtesy tone  beep for linkunkeyct...


On Thu, Aug 14, 2014 at 8:24 AM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to
        app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
        app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
        app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Re: Bad echolink Audio (Bob)
   2. Re: DTMF digits on IaxRpt (Skyler F)
   3. Re: DTMF digits on IaxRpt (Bryan D. Boyle)


----------------------------------------------------------------------

Message: 1
Date: Wed, 13 Aug 2014 20:15:28 -0700
From: "Bob" <kk6ecm@gmail.com>
To: "'Bradley Haney'" <hammin75@gmail.com>,
        <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Bad echolink Audio
Message-ID: <1569B2555B344E4F9727C314470D8A00@ThePykesHP>
Content-Type: text/plain; charset="us-ascii"

Not sure what you mean by choppy, but if the input from the internet over
drives the software gains, that could happen. Have you adjusted your
Echolink gains in echolink.conf?



I had to adjust ours as follows because incoming and outgoing seemed to be
over driven. At  the suggestion of this list my first estimate was -6.0 and
0.0 respectively.

erxgain=-7.0   ;-3.0 default

etxgain=-1.0   ; 3.0 default



Bob

kk6ecm

  _____

From: app_rpt-users-bounces@ohnosec.org
[mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bradley Haney
Sent: Wednesday, August 13, 2014 7:56 PM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Bad echolink Audio



[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:15046 rpt: [28079]
link=3200615/echolink/el0-0 TIMEOUT rxlingertimer

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16628 rpt: node=28079 hnr=0
link=3200615/echolink/el0-0 got AFC=12 data=

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16671 rpt: node=28079
link=3200615/echolink/el0-0 ACRK data=(null)

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16699 rpt: [28079]
link=3200615/echolink/el0-0 ACRK data= set l->lastrealrx

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:15046 rpt: [28079]
link=3200615/echolink/el0-0 TIMEOUT rxlingertimer

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16628 rpt: node=28079 hnr=0
link=3200615/echolink/el0-0 got AFC=12 data=

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16671 rpt: node=28079
link=3200615/echolink/el0-0 ACRK data=(null)

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16699 rpt: [28079]
link=3200615/echolink/el0-0 ACRK data= set l->lastrealrx





Anyone have any idea  why  audio from  ECHOLINK comes in choppy  i have
tried to adjust everything i could think of.. I am using xipar.. I tried it
on 2 different machines and both are choppy.. But audio form asterisk to
echo link seems fine..





I see something above that says timeout rxlinger timer   but don't know how
to adjust  that if that is  even it





bradley

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20140813/831061c3/attachment-0001.html>

------------------------------

Message: 2
Date: Thu, 14 Aug 2014 06:51:20 -0600
From: Skyler F <electricity440@gmail.com>
To: larry <larry@n7fm.com>
Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] DTMF digits on IaxRpt
Message-ID:
        <CAJNyT09aTx7zuSbuSPAWob48Arc1+s=vD8Z=PoF+FpuF1+tq4w@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

I don't know if this is related to above, but I use the cop 48 command to
have my node automaticaly dial DTMF. It is fairly slow dialing though, and
could speed up a bit. Other than recording a wav file, converting it to
GSM, and playing that, is there a way to speed up the DTMF?

73
Skyler


On Wed, Aug 13, 2014 at 8:17 PM, larry <larry@n7fm.com> wrote:

> Thanks to all who replied.
>
> Good comment about VOIP even though not to my liking. Since IaxRpt is
> capable of passing DTMF to Node Radios as well as other telephone equipment
> I was curious as to why exclude the other 4 buttons? And did anyone have an
> easy fix to add them rather than creating Macros to send the other 4 DTMF
> sequences. Current mode is like building a convertible and not including a
> top. Makes it strictly a fair weather unit and prevents it's use as a rain
> or snow vehicle.
>
> Larry - N7FM
>
>
>
>
> On 08/13/2014 04:26 PM, Bob wrote:
>
>> I may be missing something, but it seems to me VoIP uses a 12 button
>> keypad,
>> not 16. Radios use 16, but they are not VoIP. What is it you are trying to
>> do with the extra keys?
>>
>> Thanks,
>> Bob
>> kk6ecm
>>
>> -----Original Message-----
>> From: app_rpt-users-bounces@ohnosec.org
>> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of larry
>> Sent: Wednesday, August 13, 2014 3:31 PM
>> To: app_rpt-users@ohnosec.org
>> Subject: [App_rpt-users] DTMF digits on IaxRpt
>>
>>
>> If using IaxRpt control panel can anyone explain how to dial DTMF digits
>> A,B,C,D?
>>
>> I don't mean the propagation issue. I mean the keypad is only a 12
>> button keypad not a 16 key.
>>
>> Anyone know a way to add the other 4 buttons (A,B,C,D) or send their
>> tones as if they are being dialed from the keypad?
>>
>> Larry - N7FM
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users@ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to
>> the bottom of the page. Enter your email address and press the
>> "Unsubscribe
>> or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



--
Skyler Fennell
amsatnet.info
KD?WHB
electricity440@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20140814/4a6a3e59/attachment-0001.html>

------------------------------

Message: 3
Date: Thu, 14 Aug 2014 09:24:38 -0400
From: "Bryan D. Boyle" <bdboyle@bdboyle.com>
To: app_rpt mailing list <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] DTMF digits on IaxRpt
Message-ID: <5E509CC3-C3CD-405C-861B-8FDD51D0D9B0@bdboyle.com>
Content-Type: text/plain; charset="us-ascii"

The issue is *why* is it so danged important to have the A-D keys decoded?  security through obscurity?  Because they are there on ham mics?

No one has really described a use case for why this artifact of the whole dtmf protocol is really needed.   especially when, with the asterisk system, there is almost an unlimited functionality with using just the 10 digits bracketed by the star and octothorpe.

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



> On Aug 13, 2014, at 22:17, larry <larry@n7fm.com> wrote:
>
> Thanks to all who replied.
>
> Good comment about VOIP even though not to my liking. Since IaxRpt is capable of passing DTMF to Node Radios as well as other telephone equipment I was curious as to why exclude the other 4 buttons? And did anyone have an easy fix to add them rather than creating Macros to send the other 4 DTMF sequences. Current mode is like building a convertible and not including a top. Makes it strictly a fair weather unit and prevents it's use as a rain or snow vehicle.
>
> Larry - N7FM
>
>
>
>> On 08/13/2014 04:26 PM, Bob wrote:
>> I may be missing something, but it seems to me VoIP uses a 12 button keypad,
>> not 16. Radios use 16, but they are not VoIP. What is it you are trying to
>> do with the extra keys?
>>
>> Thanks,
>> Bob
>> kk6ecm
>>
>> -----Original Message-----
>> From: app_rpt-users-bounces@ohnosec.org
>> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of larry
>> Sent: Wednesday, August 13, 2014 3:31 PM
>> To: app_rpt-users@ohnosec.org
>> Subject: [App_rpt-users] DTMF digits on IaxRpt
>>
>>
>> If using IaxRpt control panel can anyone explain how to dial DTMF digits
>> A,B,C,D?
>>
>> I don't mean the propagation issue. I mean the keypad is only a 12
>> button keypad not a 16 key.
>>
>> Anyone know a way to add the other 4 buttons (A,B,C,D) or send their
>> tones as if they are being dialed from the keypad?
>>
>> Larry - N7FM
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users@ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
>> the bottom of the page. Enter your email address and press the "Unsubscribe
>> or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20140814/a2b4ab06/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 66, Issue 22
*********************************************