You would also need to take out the ID and in the [telemetry] stanza, do the same for "remotetx=" as well. Some of these fields don't like true zero values, so you may cause Asterisk to die. If so, try some non-zero value that is small.

N5ZUA

On 1/28/2015 1:27 PM, Andrew Sylthe wrote:
Hello All,

I'm struggling to configure my simplex node in a particular way.  As of right now I have duplex=0 specified for my node in rpt.conf.  My goal is to maintain the functionality of duplex=0, but do want a courtesy tone to transmit ONLY when a remotely connected AllStar node unkeys.  I do not want the simplex node to ID or transmit a courtesy tone for local transmissions.  Has anyone else configured their node in such a way?  If so, would you be willing to share your configuration.

I've tried setting duplex=1 in rpt.conf along with the following settings with no luck:

; Telemetry & Courtesy Tone Options
telemetry=telemetry
;unlinkedct=ct2 ; Sent when not connected to another node
remotect=ct3   ; Sent when remote base connected
linkunkeyct=ct8 ; sent when a network user unkeys
nolocallinkct=1
eannmode=2
echolinkdefault=0
echolinkdynamic=0
nounkeyct=0
holdofftelem=1
telemdefault=0
telemdynamic=0
guilinkdefault=0
guilinkdynamic=0
phonelinkdefault=0
phonelinkdynamic=0


Thank you in advance for anyone that is able to help!

--
Andrew Sylthe
KC9ONA


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.