Lets get back to the original post.

One server three nodes. Nodes are not able to connect to each other on the same server.

My guess:

1) loopback IP's are getting blocked or miss routed.

2) Server loses integrity over time

2)app_rpt is not reading the node stanza in rpt.conf.

What does Asterisk cmd say when the error presents itself? i.e. when you try to connect one node to another? Verbose should be high.

You can turn on logging. /etc/asterisk/logger.conf

messages => notice,warning,error,debug,verbose

"Be warned that logging could fill your hard drive fast"

Is there any other services on this server?

David

KE6UPI

Thanks, David

"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."

Thomas Jefferson

On Wed, Nov 1, 2017 at 2:00 PM, Bryan Fields <Bryan@bryanfields.net> wrote:

On 11/1/17 4:58 PM, Tom wrote:
> Each server in a LAN subnet must have a separate port; but all nodes on a
> given server use the one server UDP port.

This is wrong. The servers will have different IP addresses and UDP ports are
only significant per IP address.

--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.