Thanks Jim I will change my rpt.conf to rxchannel = Zap/pseudo
 
Any Idea on why no audio in my inbound Echolink connections?
 
My echolink inbound connection looks like this.
 
In extensions.conf

[radio-secure]
exten => 2345,1,Answer
exten => 2345,n,Playback(tt-weasels,skip)
exten => 2345,n,Hangup
 
 *CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call: new CALL=W0IOU,ip=204.13.148.184,name=        Todd
    -- Executing [2345@radio-secure:1] Answer("echolink/el0-12", "") in new stack
    -- Executing [2345@radio-secure:2] Playback("echolink/el0-12", "tt-weasels|skip") in new stack
    -- <echolink/el0-12> Playing 'tt-weasels' (language '')
    -- Executing [2345@radio-secure:3] Hangup("echolink/el0-12", "") in new stack
  == Spawn extension (radio-secure, 2345, 3) exited non-zero on 'echolink/el0-12'
 

Thanks
 

 
On Fri, Aug 14, 2009 at 12:58 PM, Steve Zingman <szingman@msgstor.com> wrote:
Todd Birkenholtz wrote:
> Fellow Hams and PBX tinkerer's
>
> I want to provide a auto-patch and a repeater dial-in for our club
> repeater using my existing home Asterisk PBX in a Flash setup.
> Our club repeater is connected to Echolink so I was thinking about
> creating a Echolink node on my server that users could link to then I
> would allow an outbound call.
> On the reverse I would like to provide a repeater dial-in number that
> would route through my Asterisk server to our club's node via
> Echolink. Keeping in mind at no time does my Asterisk server actually
> communicates with a radio directly it is just acting as a Echolink
> gateway.
>
> I have been experimenting with ACID but it appears the radio/usb
> driver is preventing Asterisk from loading without a actual usb radio
> connected. If I noload=chan_usbradio in the modules.conf file then
> Asterisk appears to load but I am still having problems with refrence
> to it in my rpt.config file.
>
> I have been able to configure a Echolink connection but I
> cant send audio to the connected node when the remote station connects
> but the Asterisk debug indicates it is.
> Does anybody have a working Echolink node that they would like to
> share their iax,echolink,rpt and extensions config file with me.
>
>
Todd,
Set rxchannel = Zap/pseudo in place chan_usb in rpt.conf You will not
need the hardware.


73, Steve N4IRS
_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users