I tried DIAL and hamvoip versions, neither would boot on the Pi Zero W.

I'm not a programmer and don't usually compile anything at all, actually I try to avoid it. I'm guessing AllStar can be compiled manually with Raspbian Lite. If anyone has any links or instructions how I can compile AllStar on Raspbian Lite I'd be glad to try and attempt it. In the mean time I'll begin researching it. 73

On Tue, Nov 7, 2017 at 5:56 PM, Andrew Sylthe <asylthe@kc9ona.com> wrote:
The build you mentioned doesn't support the Pi Zero.

On Nov 7, 2017 3:51 PM, "Michael Lee Lockwood" <michael@lockwood.us.com> wrote:
Why not use the app_rpt build that’s already setup for RPi?


From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> on behalf of Will Bashlor <will@bashlor.com>
Sent: Tuesday, November 7, 2017 3:46:26 PM
To: 'Users of Asterisk app_rpt'
Subject: Re: [App_rpt-users] Pi Zero W?
 

Nothing to report, but I just purchased a Pi Zero W yesterday for testing with AllStar. It should be here Friday.

 

From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of William Higgins
Sent: Tuesday, November 7, 2017 4:25 PM
To: app_rpt-users@lists.allstarlink.org
Subject: [App_rpt-users] Pi Zero W?

 

I have tried using the regular DIAL RAT_RC1 image and it doesn't boot. (Just took a shot.)

 

Has anyone tried to install the DIAL build of Allstar onto a Raspberry Pi Zero W with regular Raspbian Light on it?  What experiences did you have?

 

Thinking about a very low power mobile node.

 

Bill

 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.