That is to demonstrate that there are two CLI ways to command your node. The 'fun' way uses the rpt.conf [functions] stanza (ie TouchTones), while 'cmd' uses ilink, status and the like.

Because your configuration doesn't have [functions] for 74 it won't work. These both say the time on my nodes because *74 points to status 12:

rpt cmd 2530 status 12 xxx

rpt fun 2530 *74

The advantage of using 'cmd' commands in the Allmon control panel is they always work no matter your node configuration.

On Sat, Jan 27, 2018 at 11:26 PM, larry <larry@n7fm.com> wrote:

Tim,

Using Allmon2, In the canned control window you have a function that says "Say time (the TT way)"
What does/did that actually do? Since it is defined to use *74 (which is undefined).
I was wondering what you had it configured to accomplish when you used it?

Did you use it to broadcast the DTMF command to another radio/repeater?.

Just curious

Larry - N7FM
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--

Tim WD6AWP