in  voter.conf, set bufflen higher like this, then reload.  After it
is working you can always trim the value down a little at a time till
it quits working, then increase it about 40 from that. Menu 18 should
be 0. works here.

port = 667
; buflen = 120 min value that works at all
buflen = 400


On Sun, Aug 11, 2013 at 11:21 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
> I know, really weird. If i just change client 2 rtcm menu item 18=0 it will
> start transmitting and it is still voting.
>
>
> On Sun, Aug 11, 2013 at 11:16 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
>>
>> That's weird, so only the master transmits. Hmmmm...
>>
>> what happens when you do *CLI>voter display 28304? Are they both there?
>>
>> You do have different passwords for each client, right?
>> --
>> Tim
>> :wq
>>
>> On Aug 11, 2013, at 9:11 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
>>
>> Yes, I have 2 clients and the first 1 is transmitting. What is also
>> interesting is client 2 will transmit telemetry. ie CW ID, anything using
>> rpt fun 28304 like COP 4
>>
>> [28304]
>> KD5DFB_main=xxx,transmit,master
>> KD5DFB_site1=xxx,transmit
>>
>>
>> On Sun, Aug 11, 2013 at 10:58 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
>>>
>>> Are other clients supposed to transmit, and do they?
>>> --
>>> Tim
>>> :wq
>>>
>>> On Aug 11, 2013, at 8:46 PM, Michael Hebert <mhebert1975@gmail.com>
>>> wrote:
>>>
>>> I just changed menu 18=0 on both rtcms. I also changed the menu 7 to
>>> 3000.
>>>
>>> No strange messages on level 3. Standard  Hungup 'Zap/pseudo-1855322317'
>>>
>>> No TX on client 2 now
>>>
>>>
>>> On Sun, Aug 11, 2013 at 10:34 PM, Tim Sawyer <tim.sawyer@me.com> wrote:
>>>>
>>>> Menu 18 = 1 will be making local PTT. You want 18 = 0 with duplex=2.
>>>> Leave the TX buffers long - around 2000 or 3000 until you figure out what is
>>>> wrong.
>>>>
>>>> Are you getting any strange message on the Asterisk console with verbose
>>>> level 3?
>>>> --
>>>> Tim
>>>> :wq
>>>>
>>>> On Aug 11, 2013, at 7:58 PM, Michael Hebert <mhebert1975@gmail.com>
>>>> wrote:
>>>>
>>>> Very interesting. Playing around with the settings on both RTCMs and
>>>> found it works with menu 7 set for 600 and menu 18 set for 1.
>>>>
>>>> If I set menu 18 to 0 the non master client, it will not transmit.
>>>>
>>>> Also, I checked my rpt.conf and duplex=2
>>>>
>>>>
>>>> On Sun, Aug 11, 2013 at 9:01 PM, Matthew <n8ohu@yahoo.com> wrote:
>>>>>
>>>>> This might sound like an odd question, but did chan_voter compile
>>>>> cleanly for you? I just grabbed the latest svn code and it did not compile
>>>>> for me at all. The error it gave me I would need to check tomorrow, as I'm
>>>>> currently not at the computer.
>>>>>
>>>>> Matthew Pitts
>>>>> N8OHU
>>>>>
>>>>> Sent from my Verizon Wireless 4G LTE smartphone
>>>>>
>>>>> -------- Original Message --------
>>>>> Subject:Re: [App_rpt-users] RTCM simulcast help
>>>>> From :Michael Hebert
>>>>> Date :Sun, 11-Aug-2013 21:54
>>>>> To :Jim Duuuude
>>>>> CC :app_rpt mailing list
>>>>>
>>>>> Just changed both of them to 3000 and rebooted. Also, rebooted the
>>>>> asterisk machine.
>>>>>
>>>>> Still no TX on KD5DFB_site1=xxx,transmit
>>>>>
>>>>>
>>>>> On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>
>>>>> wrote:
>>>>>>
>>>>>> well, why dont you try something higher then 480...
>>>>>>
>>>>>> ________________________________
>>>>>> Date: Sun, 11 Aug 2013 20:37:49 -0500
>>>>>> Subject: Re: [App_rpt-users] RTCM simulcast help
>>>>>> From: mhebert1975@gmail.com
>>>>>> To: telesistant@hotmail.com
>>>>>> CC: app_rpt-users@ohnosec.org
>>>>>>
>>>>>> 1) S/W Version: 1.26 08/10/2013 on both of them
>>>>>>
>>>>>> 2) 480 on both of them
>>>>>>
>>>>>>
>>>>>> On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> 1) What version of RTCM firmware are you running?
>>>>>>
>>>>>> 2) What do you have your TxBufferLength set to (in the RTCM) ?
>>>>>>
>>>>>> Jim
>>>>>>
>>>>>> ________________________________
>>>>>> Date: Sun, 11 Aug 2013 19:43:36 -0500
>>>>>> From: mhebert1975@gmail.com
>>>>>> To: app_rpt-users@ohnosec.org
>>>>>> Subject: [App_rpt-users] RTCM simulcast help
>>>>>>
>>>>>> All,
>>>>>>
>>>>>> I am trying to enable simulcast on my system. I have gone into the
>>>>>> voter.conf and added the "transmit" statement. The 2nd repeater is not
>>>>>> transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1
>>>>>> or the red TX indicator lighting up
>>>>>>
>>>>>> I have done a astres.sh and rebooted both RTCMs
>>>>>>
>>>>>> Here is my voter.conf
>>>>>>
>>>>>> [general]
>>>>>> port = 667
>>>>>> buflen = 120
>>>>>> password = xxx
>>>>>>
>>>>>> [28304]
>>>>>> KD5DFB_main=xxx,transmit,master
>>>>>> KD5DFB_site1=xxx,transmit
>>>>>>
>>>>>>
>>>>>> Here is my menu 98 on the RTCM
>>>>>>
>>>>>> GPS Lock: 1
>>>>>> Connected: 1
>>>>>> COR: 1
>>>>>> EXT CTCSS IN: 0
>>>>>> PTT: 0
>>>>>> RSSI: 255
>>>>>> Current Samples / Sec.: 8000
>>>>>> Current Peak Audio Level: 1496
>>>>>> Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134
>>>>>> Current Time: Mon  Aug 12, 2013  00:40:50.800
>>>>>> Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec
>>>>>> Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec
>>>>>> Last Rx Pkt index: 0, inbounds: 0
>>>>>>
>>>>>>
>>>>>> _______________________________________________ App_rpt-users mailing
>>>>>> list App_rpt-users@ohnosec.org
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users@ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users@ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>
>>>
>>
>>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>