Same question,
But also:
How are you adjusting the audio in the radio?
The "normal" two places to inject are the MIC input, the second
is the PL input.
I can "see" the pot in my head, but don't remember the number
off my head for the deviation pot. You might be up against the
limiter.
Mark
KC5EVE
At 05:12 AM 8/16/2013, Ross Johnson wrote:
Hey bob
Where are you injecting the audio? There should be plenty of headroom. Is
the mic still connected?
Ross
www.kc7rjk.net
From: Bob Roszkowski
Sent: Thursday, August 15, 2013 8:12 PM
To:
App_rpt-users@ohnosec.org
Subject: [App_rpt-users] Mastr II and URI low TX audio
I have a Mastr II mobile tuned up in the ham bands. Trying to set
the audio levels. RX worked great. Problem with TX audio, I
can only get 2KHz deviation max if I set the level to 999 in
app_rpt. I am using the URI and have wired it to use the 6db
amplifier on board. Anyone else run into this problem?
boB - W5EVH
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users