----- Original Message -----
Sent: Monday, February 07, 2011 4:34
PM
Subject: [App_rpt-users] URI
Configuration/Testing
Hi all,
I've gotten my (N2OYJ) system up and functioning
in a simple mode so I can have access to the local repeater from the computer
room. A friend and I are trying to set up another unit for something
similar. Using XIPAR as the base, a URI and either a CDM750 or GM300 as the
radio it attached to.
There appears to be an issue I haven't yet
found. Using the working configuration from my system as a starting
point, the 'radio tune rxnoise' returns the error as if there is no signal on
the flat audio pin (PIN 11). This occurs on BOTH radios. The next step
is to bring the working radio/URI combination to the non-working system and
see it the error remains, then switch URI's;all to try and isolate the
problem.
Q: Is there a way to test the URI? Either using a signal
generator or not using a generator (both was might be good for
others).
Rod
N2OYJ