Hi Guys
I have tried loading
ASL_1.01-20180228-armhf-nanopi image onto a NanoPi
Seems to load fine I run the updates etc
then the Menu all seems OK but AllStar does not seem to run ?
return email: bob@Fot.com.au
NODE=47324
REGPASS=47324:xxxxx@register.allstarlink.org
; This must be changed to your node number, password
Call sign: VK6Z
Interface type: SimpleUSB/usb_47324 ;
SimpleUSB
Echolink Callsign: INVALID
Echolink node: 000000 ASL node used:
Ping test to 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of
data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=117
time=60.5 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=117
time=60.1 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=117
time=59.8 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=117
time=60.1 ms
--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 received, 0%
packet loss, time 3004ms
rtt min/avg/max/mdev =
59.856/60.180/60.579/0.357 ms
Ping test to register.allstarlink.org
PING register.allstarlink.org
(67.215.233.178) 56(84) bytes of data.
64 bytes from seal.lambdatel.com
(67.215.233.178): icmp_seq=1 ttl=50 time=209 ms
64 bytes from seal.lambdatel.com
(67.215.233.178): icmp_seq=2 ttl=50 time=208 ms
64 bytes from seal.lambdatel.com
(67.215.233.178): icmp_seq=3 ttl=50 time=208 ms
64 bytes from seal.lambdatel.com
(67.215.233.178): icmp_seq=4 ttl=50 time=287 ms
--- register.allstarlink.org ping
statistics ---
4 packets transmitted, 4 received, 0%
packet loss, time 3004ms
rtt min/avg/max/mdev =
208.420/228.404/287.132/33.912 ms
Ouput of ifconfig
eth0:
flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.168.55 netmask
255.255.255.0 broadcast 192.168.168.255
inet6 fe80::6888:f0ff:fe2f:e5b
prefixlen 64 scopeid 0x20<link>
ether 6a:88:f0:2f:0e:5b txqueuelen
1000 (Ethernet)
RX packets 2688 bytes 223583
(218.3 KiB)
RX errors 0 dropped 0 overruns 0
frame 0
TX packets 1227 bytes 325560
(317.9 KiB)
TX errors 0 dropped 0 overruns 0
carrier 0 collisions 0
device interrupt 33
lo: flags=73<UP,LOOPBACK,RUNNING>
mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid
0x10<host>
loop txqueuelen 1000 (Local
Loopback)
RX packets 32 bytes 2608 (2.5 KiB)
RX errors 0 dropped 0 overruns 0
frame 0
TX packets 32 bytes 2608 (2.5 KiB)
TX errors 0 dropped 0 overruns 0
carrier 0 collisions 0
Output of lsmod grep dahdi
IAX2 registry
Unable to connect to remote asterisk (does
/var/run/asterisk.ctl exist?)
Asterisk version:
Unable to connect to remote asterisk (does
/var/run/asterisk.ctl exist?)
Current date and time: 2018-07-23.11:36
updatenodelist service running?
root 657 0.0 0.4 4428 2392
? Ss 11:14 0:00 /bin/bash
/usr/local/bin/rc.updatenodelist &
root 1637 0.0 0.1 3764 548
pts/0 S+ 11:40 0:00 grep updatenodelist
/tmp/rpt_extnodes-temp file
-rw-r--r-- 1 root root 0 Jul 23 11:15
/tmp/rpt_extnodes-temp
/var/lib/asterisk/rpt_extnodes file
-rwx------ 1 root root 141311 Jul 23 11:09
/var/lib/asterisk/rpt_extnodes
####### Begin warnings from messages file
####### Begin warnings from messages.1 file
journalctl –xe
Using username "repeater".
repeater@repeater's password:
_ _ ____ _ _ _
| \ | | __ _ _ __ ___ | _ \(_) | \ | |
___ ___
| \| |/ _` | '_ \ / _ \| |_) | | | \| |/
_ \/ _ \
| |\ | (_| | | | | (_) | __/| | | |\ |
__/ (_) |
|_| \_|\__,_|_| |_|\___/|_| |_| |_|
\_|\___|\___/
Welcome to ARMBIAN 5.41 user-built Debian
GNU/Linux 9 (stretch) 4.14.18-sunxi
System load: 0.00 0.02 0.00 Up
time: 9 min Local users: 2
Memory usage: 10 % of 493MB
IP: 192.168.168.54
CPU temp: 29°C
Usage of /: 10% of 15G
Last login: Mon Jul 23 10:04:18 2018 from
192.168.168.26
repeater@repeater:~$
repeater@repeater:~$ sudo -s
[sudo] password for repeater:
root@repeater:/home/repeater# journalctl
-xe
-- The start-up result is done.
Jul 23 10:05:21 repeater systemd[1]:
dev-dahdi-pseudo.device: Job dev-dahdi-pseu
Jul 23 10:05:21 repeater systemd[1]: Timed
out waiting for device dev-dahdi-pseu
-- Subject: Unit dev-dahdi-pseudo.device
has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit dev-dahdi-pseudo.device has failed.
--
-- The result is timeout.
Jul 23 10:05:21 repeater systemd[1]:
Dependency failed for Asterisk PBX and tele
-- Subject: Unit asterisk.service has
failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit asterisk.service has failed.
--
-- The result is dependency.
Jul 23 10:05:21 repeater systemd[1]:
asterisk.service: Job asterisk.service/star
Jul 23 10:05:21 repeater systemd[1]:
dev-dahdi-pseudo.device: Job dev-dahdi-pseu
Jul 23 10:05:21 repeater sudo[1169]:
pam_unix(sudo:session): session closed for
Jul 23 10:06:23 repeater sudo[1370]:
repeater : TTY=pts/2 ; PWD=/home/repeater ;
Jul 23 10:06:23 repeater sudo[1370]:
pam_unix(sudo:session): session opened for
lines 1316-1338/1338 (END)
Current default time zone:
'Australia/Perth'
Local time is now: Mon Jul 23 09:35:43
AWST 2018.
Universal Time is now: Mon Jul 23 01:35:43
UTC 2018.
grep: /etc/systemd/network/eth0.network: No
such file or directory
/usr/local/sbin/net-setup: line 171: [:
missing `]'
mv: cannot stat '/tmp/extensions.conf.tmp':
No such file or directory
mv: cannot stat '/tmp/echolink.conf.tmp':
No such file or directory
mv: cannot stat '/tmp/iax.conf.tmp': No
such file or directory
mv: cannot stat '/tmp/modules.conf.tmp': No
such file or directory
mv: cannot stat '/tmp/rpt.conf.tmp': No
such file or directory
mv: cannot stat '/tmp/savenode.conf.tmp':
No such file or directory
mv: cannot stat '/tmp/manager.conf.tmp': No
such file or directory
mv: cannot stat '/tmp/usbradio.conf.tmp':
No such file or directory
mv: cannot stat '/tmp/simpleusb.conf.tmp':
No such file or directory
mv: cannot stat '/tmp/voter.conf.tmp': No
such file or directory
Using username "repeater".
repeater@repeater's password:
Anyone got any ideas ??
73
VK6ZGN
Bob Bob@Fot.com.au
Western Australia Mob. 61 (0) 418 902 194
The contents of this e-mail (including any
attachments) may be
confidential and privileged. Any unauthorised
use of this document
or it's contents is prohibited. If you have
received this e-mail in
error, please notify us immediately and erase
this document
E&OE