Jim,

I was able to load the new firmware and it does work a lot better!  But you are right, we are having a intermittent heterodyne in the overlapping areas of coverage.  How would someone modify the voter board and GPSDO to do so?

Monty

On Tue, Dec 1, 2015 at 4:39 PM, Jim Duuuude <telesistant@hotmail.com> wrote:

Yes, I think it is MORE then safe to say that the newer firmware will work a WHOLE lot
better for simulcast. It would also be helpful to modify the board to provide external
GPSDO-synchronized CPU clocking (unless you want to play the "fun" game of "gee, where's
the overlap grunge zone this week?").

If your firmware is THAT old, you will probably also see serious performance enhancements
on properly representing the S/N ratio of weak signals.

Jim

---

From: monty@ke7jvx.com
Date: Tue, 1 Dec 2015 14:48:30 -0700
To: app_rpt-users@ohnosec.org
CC: ke7jvx@gmail.com
Subject: [App_rpt-users] Thru Hole Voter Board Firmware Update Procedure

Hello All,

I have three thru hole voter boards with firmware from 2012, l am wondering if anyone has a procedure on how to update the firmware?  

Also, I see in the svn there is a Simulcast portion, and I do have two of them setup as a simulcast, is there something different with the firmware for simulcast operation?

Monty

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.