Thanks for the info Kyle,

I’m really looking to mute the MDC1200.  I like the MDC control especially since I can program contacts per command into my radio but I have several users that don’t like the mdc noise which is understandable.

On an unrelated topic; I see that if I place 100 and 123 in the rx section the node will decode either but transmits on the default which makes sense.  What’s the txctcssfreqs line for?

txctcssdefault=100.0

rxctcssfreqs=100.0,123.0

txctcssfreqs=100.0,123.0

 thanks for humoring my stupid questions

73 de K0JSC

---

From: K&R Yoksh [mailto:yokshs@gmail.com]
Sent: Wednesday, September 19, 2012 10:29 AM
To: Jeffrey S. Carrier; app_rpt-users@ohnosec.org
Subject: App_rpt

Hi Jeff. I'm doing this same thing on my nodes. Check out the DTMF script on my web page:

http://www.qsl.net/k0kn/scripts.html

This will allow you to send commands to any node within the same server.

73,

Kyle
K0KN