MIke

here is a very basic diagram. Sorry Visio is on my work computer not personal. The allstar node in on the mesh network. I have a PBX on the mesh network. The phones on the mesh use 6xxx as the extension range.

On the home network I have another PBX both are linked via IAX2 trunk.  Home extensions are 5xxx.

No internet access for mesh devices except specific ports for those devices that need access link allstarlink, phones ,aprs and a couple others.no encryption allowed period.
Access to the home network is permited. no calls permitted to the outside world from the mesh only the ability to ring home extensions.

I'm looking at the files now and your last message.

Thank you

Mike 

On Sun, Jan 11, 2015 at 12:00 PM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to
        app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
        app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
        app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. what am I missing ? (Mike Lussier)
   2. Re: what am I missing ? (mike@midnighteng.com)


----------------------------------------------------------------------

Message: 1
Date: Sun, 11 Jan 2015 10:53:33 -0500
From: Mike Lussier <mike.lussier@gmail.com>
To: ALL STAR <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] what am I missing ?
Message-ID:
        <CAJ_8STk1tgh8XuMAqXgtYjrYVtHVCz54o_n_BgSSeG8K1rCWCQ@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

I stepped away from this last night. I was getting frustrated.

What I'm trying to do. dial via DTMF from radio and route the call to the
local PBX in my home. I already have a Trunk established between the PBX
and the
BBB Node. I can place calls directly to the node, TX & RX.

When I initiate a call to the phone from my HT  the only response I get
back is a courtesy tone.

I have tried all of these combinations.

*6 6001 #
*6 6001
6 6001 #
6 6001

There is an IAX2 trunk from the PBX to the BBB AllStar node running 1.2.1.

I can place a call to the node from the phone. I can transmit & receive.

on the BBB node :

I setup my test phone extension  6001 in iax.cnf file on the node the dial
command is different dial=iax/6001

[6001]
deny=0.0.0.0/0.0.0.0
username=6001
secret=xxxx
dtmfmode=rfc2833
canreinvite=no
context=radio-control
host=dynamic
trustrpid=yes
sendrpid=no
type=peer
nat=no
port=5060
qualify=yes
qualifyfreq=60
transport=udp
encryption=no
callgroup=RPT
pickupgroup=ALL
dial=IAX6001
permit=0.0.0.0/0.0.0.0
allow=ulaw,gsm,h263

=======

rpt.conf

6=autopatchup,noct=1,farenddisconnect=1,dialtime=
40000     ; Autopatch
up


=======
In extensions.conf the phone patch is the [RADIO] context

[radio]
exten => _5XXX,1,Dial(iax/${EXTEN},17);  ; home phones
exten => _6XXX,1,Dial(iax/${EXTEN},17);  ; mesh phones
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20150111/75071a41/attachment-0001.html>

------------------------------

Message: 2
Date: Sun, 11 Jan 2015 09:25:29 -0700
From: <mike@midnighteng.com>
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] what am I missing ?
Message-ID:
        <20150111092529.71befee5dbd13c5325dd1a521b4e73ee.4b2d3a50e4.wbe@email06.secureserver.net>

Content-Type: text/plain; charset="utf-8"




Mike,

the correct dial is *6 6001 from the radio.To mesh node.
*6 5xxx to a extension on the local box according to your files set-up.

The first thing I see in you notes is that when dialing the 6001
extension,
If I understand your set-up is a external mesh node so you must make the
path to it in your dial string.


exten=_6XXX,1,Dial,IAX2/PBX/${EXTEN}        ;dial on pbx3

says if the 4 digit string starting with a 6 then dial a 6xxx extension
using iax2 with the PBX trunk.

PBX in my string is the name of the trunk through which my external
calls starting with a 6 go through and must be stated. If not on this
box, you need to tell it how to get there.

Now at the node that 6xxx extension is at, there must be a iax extension
that will answer a matching 6xxx call dialed.


Get this to work at the local box first (5xxx) before you attempt to
dial to a mesh node extension.

I guess I should ask...
what is on the other side of the mesh connection, a node or just an
extension?

...mike/kb8jnm



> -------- Original Message --------
> Subject: [App_rpt-users] what am I missing ?
> From: Mike Lussier <mike.lussier@gmail.com>
> Date: Sun, January 11, 2015 10:53 am
> To: ALL STAR <app_rpt-users@ohnosec.org>
>
>
> I stepped away from this last night. I was getting frustrated.
>
> What I'm trying to do. dial via DTMF from radio and route the call to the
> local PBX in my home. I already have a Trunk established between the PBX
> and the
> BBB Node. I can place calls directly to the node, TX & RX.
>
> When I initiate a call to the phone from my HT  the only response I get
> back is a courtesy tone.
>
> I have tried all of these combinations.
>
> *6 6001 #
> *6 6001
> 6 6001 #
> 6 6001
>
> There is an IAX2 trunk from the PBX to the BBB AllStar node running 1.2.1.
>
> I can place a call to the node from the phone. I can transmit & receive.
>
> on the BBB node :
>
> I setup my test phone extension  6001 in iax.cnf file on the node the dial
> command is different dial=iax/6001
>
> [6001]
> deny=0.0.0.0/0.0.0.0
> username=6001
> secret=xxxx
> dtmfmode=rfc2833
> canreinvite=no
> context=radio-control
> host=dynamic
> trustrpid=yes
> sendrpid=no
> type=peer
> nat=no
> port=5060
> qualify=yes
> qualifyfreq=60
> transport=udp
> encryption=no
> callgroup=RPT
> pickupgroup=ALL
> dial=IAX6001
> permit=0.0.0.0/0.0.0.0
> allow=ulaw,gsm,h263
>
> =======
>
> rpt.conf
>
> 6=autopatchup,noct=1,farenddisconnect=1,dialtime=
> 40000     ; Autopatch
> up
>
>
> =======
> In extensions.conf the phone patch is the [RADIO] context
>
> [radio]
> exten => _5XXX,1,Dial(iax/${EXTEN},17);  ; home phones
> exten => _6XXX,1,Dial(iax/${EXTEN},17);  ; mesh phones<hr>_______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 71, Issue 18
*********************************************



--
"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan