moved my Allstarlink node from a full size Dell desktop to an HP5740E Thin Client 4g flash drive & 2g memory so in short went from 130 watts of power A/C to running on the same P/S as the repeater @12v 20 watts power and running flawlessly for 3 weeks
Jim Frederick KF6QBW
444.825+ PL100.0 Hz. Repeater
WINsystem Affiliate # 93
EchoLink Node 828611
AllStar Node # 28839
YSF Node # 11113
Transmit to Live & Live to Transmit
On Sun, Nov 8, 2015 at 5:52 AM, Steve Zingman <szingman@msgstor.com> wrote:
Jim,
Good to hear everything is going well. What hardware are you running on?
73, Steve N4IRS
On 11/08/2015 04:47 AM, 41.2 Jim wrote:
Thanks to all that was involved in this new softwareI have now started to help friends to upgrade to the new DIAL software, as I said it's very easy change. Thought you all should knowFYI:It has been rock solid since the install, about 3 weeks now, and is faster in every way, the reboot is only a 10 seconds until you are back to the log in, as my ACID install would hang at the "sendmail" part of the re-load.
I've installed the new DIAL, Debian version software, upgrading from the ACID install for Allstarlink and I could not be any happier.... I found the install so much easier to install and could say it "holds your hand" all the way through, and any mistakes can easily be restarted again with a simple command,(portal, network ect..) . At least I found it a lot more simple than the ACID install.
I am a Windows guy and I know almost nothing about Linux, this new software was "Cake" to install
Jim Frederick KF6QBW
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic