Command cop 49 will deny all incoming connections. Both Allstar and Echolink.
In rpt.conf inside the functions stanza, assign it to a DTMF code of your liking.
For example, "69=COP,49" . Then in the node stanza add "startup_macro=*69".
When your restart, the macro will execute and set the node deny incoming connections.
No need to do the "deny=" in echolink.conf.
Personally, I'd also add a function with COP,50 should you want to enable incoming on the fly.
On February 12, 2015 7:37:09 PM EST, Elden Fenison <w7ldn@w7ldn.com> wrote:I have a little node in my garage that runs on a simplex frequency at 5 watts. The range is probably a mile or two. This node was intended strictly for my own use. I use a HT to talk to it while I'm at home.In thinking of the legal (FCC) ramifications of running a node... it seems I'm at risk. If anyone dials into the node via VoIP on either Echolink or Allstar... they will essentially be transmitting from my node radio. I do believe I need to be in control of the node (my station) at all times per FCC rules. Well, obviously if I'm at work and out of range, I can't be monitoring my node for illegal transmissions.I can't be the first one with this question. I think denying all inbound VoIP calls might make this somewhat more safe. I know how to deny inbound Echolink calls via the deny statement.But how do I deny inbound Allstar calls? Do I just make my node privat e? And how does one do that? Do I just comment out the "register" statement in iax.conf?
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem._______________________________________________
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.