All I did was go out to repeater site and Swap USB cords and the entire thing just started working both sides VHF and UHF kinda crazy but I guess maybe some how the software and USB config just got mixed some where...

Loren Tedford (KC9ZHV) 
Email: lorentedford@gmail.com
http://kc9zhv.lorentedford.com


On Tue, Sep 16, 2014 at 9:32 AM, <mike@midnighteng.com> wrote:

Loren.

If the software "hears" dtmf then you have a problem tx'ing the rx audio.

Check usbradio.conf for proper mix settings and

also check the level settings for a type error (usbradio_tune_XXX) etc.

...mike/kb8jnm

-------- Original Message --------
Subject: [App_rpt-users] Trouble shooting
From: Loren Tedford <lorentedford@gmail.com>
Date: Tue, September 16, 2014 10:13 am
To: app_rpt mailing list <app_rpt-users@ohnosec.org>

Hey its Loren here I am working on our repeater system out here in Olney IL we put in a pico power supply and a few other things including a motherboard we reinstalled from the Acid cd and for some reason we are not passing audio full duplex through the RX side of the repeater suddenly.. Seems strange because the repeater can still capture DTMF makes me wonder if maybe its trying to pick up a ctcss tone or some thing idk did all the trouble shooting I could think of all night last night and still no luck any ideas????
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.