Your FOB is stuck.

Try unplugging (live), wait 5 seconds, and plugging back in same slot.

If it works, I suggest a new FOB. I have had a few that continuously get stuck and replacing them worked for me so I'm not sure what the problem is/was.

...mike/kb8jnm

-------- Original Message --------
Subject: Re: [App_rpt-users] audio radio to internet issue
From: ea8ee <ea8ee1@gmail.com>
Date: Sat, February 08, 2014 2:14 pm
To: app_rpt mailing list <app_rpt-users@ohnosec.org>

I tried with  cli and radio tune rxnoise and the pc says the device usb27305 currectly not active ! any suggestion?

2014-02-08 8:51 GMT+00:00 jose <ea8ee1@gmail.com>:

Hi Doug! the ptt and audio from internet to radio works nicely the problem is about the audio from radio to internet not audio neither the node receive the dmtf from radio or webstransceiver

El 08/02/2014 6:31, Doug Crompton escribió:

You need to set -

duplex=1  ; Simplex, no telelmetry
duplex=0  ; Simplex, telelmetry

in rpt.conf if you are running simplex.

Also make sure the polarity is correct in your usbradio or simpleusb file for the PTT and COS if you are using it.

---

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.