A software based system cannot provide the timing required for a voter system. See https://www.allstarlink.org/votersystem.pdf under "Description," first two paragraphs.

Thanks,

Bob

k6ecm

73

Sent from iPad

On Apr 25, 2017, at 7:32 PM, Doug Kingston <dpk@randomnotes.org> wrote:

I am considering using these for a amateur repeater voting application.  The alternative would be to roll my own with a Raspberry Pi 3 and probably the HamVOIP.org distribution.  Who out there is using the RTCM?  I can find very little information beyond the manual and I am concerned that the software may not be maintained and that there is not enough access to the underlying Linux system.

Who can tell me more about the RTCM?

Has anyone rolled their own with a Pi3?  Any advice there?

-Doug-

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.