hi steve

the main issue steve is not the fact that
service asterisk restart does not work.

but the main issue is that if asterisk crashes for any reason
it will not restart itself. because of this i also can not use
cop,1 cop command which is asterisk restart.

cop,1 will cause asterisk to exit for restart but asterisk will
not restart via a watchdog script.

safe_asterisk used to do this very nicely but it has been eliminated.
and you only use the asterisk service script under systemd.

yes the version of the asterisk service script i have here from the
dial build from about 4 to 5 weeks ago the
service asterisk restart does not work.

it force's me to use service asterisk stop to remove the
asterisk.ctl file from the /var/run and the
the service asterisk start will then work allowing asterisk
to be restarted proprely.

I also have a node setup for remote base mode using an
ic-706mkiig and sometimes that will cause a crash with it.
when asterisk is accessed via an allmon2 dashboard.

I have had to take the remote base node off of the
allmon2 page to stop this crashing.

it will do it every time too.
that is something with the old remote base code
with in app_rpt.c too which has never been fixed.

this is why the asterisk auto restart on crash would be very nice

where can i find a new or updated asterisk service script.

can i get it from the rpi2 dial image and put in the
dial x86 build with out having to re-install
dial x86 image?

otherwise for the most part asterisk under dial has been
fairly stable. but i can make it crash under certain conditions
which i try to avoid. like using allmon2 to access
the remote base node via the asterisk manager
interface.

ken n1dot



On 12/12/2015 1:01 PM, Steve Zingman wrote:
Ken,
As I posted below I could not recreate your issue. is there anything I'm missing?

73, Steve

root@repeater:~# asterisk -r
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1519 currently running on repeater (pid = 4407)
repeater*CLI> rpt cmd 2150 cop 1 2150
repeater*CLI> Killed

root@repeater:~# service asterisk restart
root@repeater:~# asterisk -r
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1519 currently running on repeater (pid = 4462)
repeater*CLI>



On 12/12/2015 11:50 AM, Kenneth Grimard wrote:
I download the dial release and installed it just after is first came out
that was about 4 weeks ago.

now if asterisk crash for any reason or if you use the cop,1 cop command
it will not restart is self at all. you have to go into an ssh shell and issue a
service asterisk stop then a service asterisk start.

the service asterisk restart does not work for me on the x86 release.

there seems to be no way for asterisk to restart itself after a crash
or after using the cop,1 cop command.

has there been any updates to the asterisk service command
for systemd to fix this?

ken n1dot



On 12/12/2015 7:16 AM, Steve Zingman wrote:
Neil,
I misread your message last night.
I just tested service asterisk restart on DIAL x86 restarts a dead asterisk. See below.

root@repeater:/etc/init.d# ps ax | grep asterisk
 1081 ?        Ssl    0:01 /usr/sbin/asterisk
 1117 pts/0    S+     0:00 grep asterisk

root@repeater:/etc/init.d# kill -9 1081

root@repeater:/etc/init.d# ps ax | grep asterisk
 1125 pts/0    S+     0:00 grep asterisk

root@repeater:/etc/init.d# asterisk -r
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)

root@repeater:/etc/init.d# service asterisk restart

root@repeater:/etc/init.d# ps ax | grep asterisk
 1143 ?        Ssl    0:00 /usr/sbin/asterisk
 1171 pts/0    S+     0:00 grep asterisk

root@repeater:/etc/init.d# asterisk -r
Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1519 currently running on repeater (pid = 1143)
repeater*CLI>

73, Steve N4IRS

On 12/12/2015 12:44 AM, Neil k8it wrote:
Steve
 
I have been evaluating Dial on a Linux PC
Observations
1. When asterisk crashes, there is no restart or watchdog
 
2.this makes debugging very difficult
3.asterisk service mode restart does not seem to work
4. in this mode remote SSH to restart is not possible
Do you have any fixes planned?
 
 
Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479
 

_______________________________________________
.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

This email has been sent from a virus-free computer protected by Avast.
www.avast.com 


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

This email has been sent from a virus-free computer protected by Avast.
www.avast.com