On Mar 16, 2019, at 3:12 AM, Bob Pyke <k6ecm1@gmail.com> wrote:

I do not recognize your port types, but AllstarLink software is designed to interface with specific interface hardware such as the DMk engineering URIx, or any number of modified USB audio interfaces based on the CM119 chip family.

My available radio port hardware I don’t think I mentioned but I have a 4 port pci radio interface card I traded Jim Dixon for long ago that has never been used and I have probably 20-30 ARIB boards that I got around the same time. That said I’m not sure what port hardware i have is important, more so that each port is a channel in asterisk and how each channel relates to the concept of a node. I’m most familiar with remote radio systems based upon the Sierra radio systems (SRS) controller which may have up to 8 ports (channels) of audio connected and any port may be connected to any other port in a cross point matrix. The general configuration is usually a remote (not remote base) full duplex radio that acts like a repeater, a number of full duplex links to other sites, and possibly a frequency agile remote base on one or more bands. Each site/controller has a prefix that is unique to that site for controlling functions at that site, the prefix I would take to be similar to a node number. In many ways I’d like to have my node(s) able to emulate this behavior (mostly for compatibility reasons) and I’m looking at how this might be done.

See https://wiki.allstarlink.org/wiki/Main_Page

Hope this helps.

Thanks,

Bob

K6ECM

Sent from iPad

On Mar 16, 2019, at 12:24 AM, Eric Fort <eric.fort.listmail@fortconsulting.org> wrote:

Could someone help me get a better idea of the concept of what a node is in asterisk/app_rpt/all star terminology. I have a computer with 4 radio ports, an fxo port, an fxs port, and an Internet connection which allows connection to any number of endpoints over sip or iax. Now what is a node? I’d like to be able via DTMF to bring one or more radios on and off link. Some of my understanding that needs to happen here is how AllStarLink is architected but also relating concepts to what I know and am familiar with which is a network of linked remotes (anyone here a cactus member or at least familiar with how a srs controller is architected as an 8x8 full duplex audio switch matrix. ) where a remote may have up to 8 radios and each of those can be linked or unlinked individually to any one or more of the other 8. Finally, how does AllStarLink prevent loops in routing? I know this seems odd at first glance but I can easily foresee audio from one source being linked to multiple places and those sources being mixed and linked back in a twisted mess. Please help me to understand

Af6ep

Sent using SMTP.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.