Well I made some progress.... Found a different place to pick off discriminator audio. I’m using Tate equipment and this is my first time working with it. The info that I have is lacking.

Guess I need to get in touch with some of me mates down-under to set me straight!

Anyway, I think it got it where I need if for now.

Thanks

Jim W7RY

From: Jim W7RY

Sent: Friday, November 16, 2012 8:29 PM

To: app_rpt-users@ohnosec.org

Subject: [App_rpt-users] Receive Adjustment Failed

Any idea guys?

I tried rxboost=1 and rxboots=0 and same results. I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber.

This is a modified CM108 USB fob.

Thanks for all the great help!

Jim W7RY

Please enter your selection now: 2

tune rxnoise maxtries=12, target=27000, tolerance=2750

tries=0, setting=2, meas=32767

tries=1, setting=2, meas=32767

tries=2, setting=2, meas=32767

tries=3, setting=2, meas=32767

tries=4, setting=1, meas=32767

tries=5, setting=1, meas=32767

tries=6, setting=1, meas=32767

tries=7, setting=1, meas=32767

tries=8, setting=1, meas=32767

tries=9, setting=1, meas=32767

tries=10, setting=1, meas=32767

tries=11, setting=1, meas=32767

DONE tries=12, setting=63, meas=32767, sqnoise=13206

ERROR: RX INPUT ADJUST FAILED.

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users