On 11/29/17 7:07 PM, Jesse Lloyd wrote:
> I suspect that if you get a packet collision using the 10 Mbps 1/2 duplex then
> the delayed packet used for timing breaks things... this is a guess at this point.
What kinda of switch do you have this connected to? A proper switch should
eliminate any collisions. I have an EX everything plugs into, and you will
need to set the RTCM to full duplex and manually configure the switch to
10/full. The RTCM doesn't do auto negotiation, and the switch will default to
10/half if it fails (this is the 802.3 standard)
73's
--
Bryan Fields
727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"rpt-users
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.