see http://ohnosec.org/drupal/node/49
we have a 3 node system setup... just
expand the concept discussed in the referenced URL
Bob
kk6ecm
From:
app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of R. Wayne
Sent: Friday, March 20, 2015 8:11
AM
To: Allstar
Subject: [App_rpt-users] Multiple
Repeaters Per Site
As we continue to grow
we are committed to using Allstar. But we are already at a loss as to how to
put multiple repeaters on the air from the same site. Sure, we can use multiple
URI’s I think and a single PC. But we prefer RTCM’s and they cost $$$. The real
question is the use of external controllers like an Arcom RC-210. They have 3
ports plus a 4th basic port. We have 2m, 440 and 900, plus a WX receiver.
URI’s are cheaper but if we do the PC approach can we declare separate config
files/directories, or would we need to install something like OpenVZ and mount
each USB device in separate containers? PC’s at remote sites concern me
especially without redundant power supplies. A RC-210 would allow the use of
only one RTCM and the ports would be linked to through the RC-210. One node
number for three repeaters, although that isn’t my preference. How much audio
delay could be expected using an external controller?
Thank you in advance.