---

From: adamson_alan@hotmail.com
To: app_rpt-users@ohnosec.org
Date: Fri, 8 Jun 2012 12:16:56 -0400
Subject: [App_rpt-users] Double ID's

HMM…

NOTE, I've recently updated to the latest svn and since then noticed this…

Anyone noticed that on an initial ID after setting idle for some time, when you have 2 nodes connected.  When a signal comes in on the remote node, it causes the local node to start the ID, about 2/3 through, it cuts off the first one and immediately generates a second as if it were one complete ID.

Doesn't do it all the time… ….

Any idea what change in the code may have done this?

Alan

_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users