At the Asterisk command line "asterisk -vr" try and connect to 2000 hub. "rpt fun 2253 *32000" What errors are you getting. I would do this with only one server/node on line and after you wait about 30 minutes after your server/node is started. This will give it time to register and for all the servers/nodes to download a node list with your node listed. Also check that iax.conf and that you have used the new register statement without a "A" in front of your node number. You shouldn't need port forwarding for out bound connections.

David

On Mon, Jan 9, 2012 at 7:16 AM, DougH <specialq.que@ntlworld.com> wrote:
OK thank you Mark / Doug. Yes understand the port forwarding, probably did
not explain sufficiently but tried both machines separately. Anyway looks
like some other problem. Will play about some more. Been two or more years
since the nodes were up and I've forgotten most of this stuff. The machines
are both on and running asterisk but only one has 4569 forwarded.....why are
they both showing on the system I wonder. Back to the drawing board.

Your assist appreciated.

Regards,
Doug - MM0BJA

----- Original Message ----- From: "Doug Bade" <kd8b@thebades.net>
To: "'DougH'" <specialq.que@ntlworld.com>; <App_rpt-users@ohnosec.org>
Sent: Monday, January 09, 2012 2:25 PM
Subject: RE: [App_rpt-users] Registration Fails



They both seem to be online as far as the allstar registry is concerned...
I do not think you can port forward 4569 to 2 different computers inside a
firewall router unless you have 2 outside IP addresses.  From an IP
perspective it is not a god plan if possible at all.. You need separate
ports for them if you plan to need TWO computers, or run both repeaters on
One computer.... at least as far as I have seen..

Doug
KD8B

-----Original Message-----
From: app_rpt-users-bounces@ohnosec.org
[mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of DougH
Sent: Monday, January 09, 2012 9:10 AM
To: App_rpt-users@ohnosec.org
Subject: [App_rpt-users] Registration Fails

My nodes 2253 and 27243 been down for some time. New modem / router
installed. Have forwarded port 4569 to each asterik computer in turn, both
fail. Get message that there is a registration problem and XIPRadio reports
no registration for peer 'gui' when attempting to connect.

Connections are possible but inbound audio only.

Found reference to registration failure indicating that 4569 may need to be
forced and to contact admin. The modem / router is a Netgear CG3101 'super
hub'.

Do the symptoms fit the problem and if so could 4569 be 'forced' please?

Thank you,
Doug - MM0BJA

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users