Once it boots up login and type the command

# service asterisk stop

Then read the log file

# nano /var/log/asterisk/messages

You will have to scroll to the bottom of the file to find out the problem.

Usually I run the following sequence of commands

# service asterisk stop

# rm -Rf /var/log/asterisk/messages

# service asterisk start

Let it run until you get the error then:

# service asterisk stop

# nano /var/log/asterisk/messages

Regards,

Chris Andrist, KC7WSU

On Apr 19, 2014, at 5:34 PM, "Russ WL7LP" <wl7lp@yahoo.com> wrote:

Howdy Folks,

My allstar box has been down for a few months due to not having

Internet connection. I got internet back finally and I just fired it up

my allstar box today it has my node 29332 and 29265 in it. once it

boots up, I get

Asterisk end with exit status 1

Asterisk died with code 1

Automatically restarting Asterisk
mpg123: no process killed

that will keep repeating over and over until I shut the machine off.
can someone tell me why this is doing this. the system was running fine
before the internet was lost

73 Russ WL7LP

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.