Hi Mohamed,

May be you must contact a radio system integrator to avoid issues during deployment.

Or change your project by using Kirk DECT/GAP base stations and repeaters to cover all your site and remote link if not too long, and you will see each engineer as a SIP account into your Asterisk.

You can contact me of this list if you want discuss more...

Best Regards,

Francois BERGERET

France

-----Message d'origine-----
De : app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net]De la part de Mohamed A. Gombolaty
Envoyé : dimanche 9 septembre 2007 10:58
À : Asterisk Repeater Controler
Objet : Re: [App_rpt] Cannot understand Radio requirements

Dear All,
I haven't had a reply back and I do really need help cause I am still fuzzy about the radio components in this project, anyway it seems to me that after the radio quad do I need to have uhf/vhf remote base to communicate with radio devices or are there other options I need something small and my range will not exceed a kilometer.
Thx
MAG
"Mohamed A. Gombolaty" wrote:
Dear All,
I am very interested in using the radio option in conjunction with my already created asterisk network, but I have no experience in the radio part nor have I any close idea about.
I studied this application requirements and saw the hardware needed they describe a radio quad which uses RJ 45 but I can't see
where the RJ goes in order to be able to communicate with the radio devices, I have absolutely no knowledge in two way radio
devices so I hope some one could complete the full picture for me behind the radio quad.
And what I plan to use this feature is to expand my * PBX network to remote sites and use it to talk to
onsite engineers through the two way radio devices using iaxrpt.
-- 
Thx
MAG
_______________________________________________
App_rpt mailing list
App_rpt@lists.illiana.net
http://lists.illiana.net/mailman/listinfo/app_rpt
-- 
Thx
MAG