Geoff,
You have it correct. If you try to run radio-tune menu as
user repeater, you do get the error. Running it with sudo
radio-tune-menu works. The user repeater does have sudo
privileges, which allow you to run a command with elevated
rights.
If you do not want to have to type sudo, you can either run
sudo -s or set the root password (which is NOT set by
default) and then use su.
73, Steve N4IRS
On
3/28/2018 8:00 AM, ARS W5OMR wrote:
In my case, it was a permissions issue.
User 'repeater' is supposed to have sudo
(sudo -l) rights, but every time I tried to enter a
command on ASL 1.01, it had to be proceeded with
'sudo'.
Try 'sudo radio-tune-menu' and see what
happens.
73
W5OMR
On Wed, Mar 28, 2018, 00:29 John Rudolph-
N2YP <
John@n2yp.com> wrote:
I'm
at a loss. I upgraded my Dial system to the new All
Star Link 1.0 and am have a few issues. When I try and
run radio-tune-menu I get
root@N2YP_Rogers_Knob:~# radio-tune-menu
Error parsing device parameters
I've read through past messages and checked that
chan_usbradio was the active one in modules and that
simple USB was set for no load. Also as of right now
my nodes load with the URI's and sort of function as
they are. Even when no radios are hooked up they
lockup in "transmit" mode. I've tried rebooting the
system and any other suggestions I could find with no
luck. I've tried with both new and old conf files with
no success.
John Rudolph
Amateur Radio Op N2YP
Unadilla,NY
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
and scroll down to the bottom of the page. Enter your
email address and press the "Unsubscribe or edit
options button"
You do not need a password to unsubscribe, you can do
it via email confirmation. If you have trouble
unsubscribing, please send a message to the list
detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.