Hi guys, 

   I bought a new (more modern) system for my AllStar activities, installed Debian Jessie x64 and ran Steve Zingman's install script from his github page (https://github.com/N4IRS/AllStar/raw/master/platforms/x86/jessie/x86_allstar_asterisk_install.sh), I use an original URI (no URI-X). 

It compiled installed just fine, so I moved over the configs in /etc/asterisk from my old install to the new, but for some reason whenever I launch the asterisk console, I get these error messages scrolling consistently: 

[Apr 11 08:08:30] WARNING[971]: chan_simpleusb.c:2137 setformat: Unable to re-open DSP device 1 (usb): No such file or directory

I removed the simpleusb_tune_usb.conf, re-ran simpleusb-tune-menu to generate a new config, restarted DAHDI, Asterisk, and rebooted etc, but the issue remains regardless. 

I dug around in the source to find the relevant line as referenced, but I'm not up to snuff on C code, but did spot something about /dev/dsp, I looked in my /dev directory and there are no dsp entries so that might be part of the issue? I also disabled the onboard sound in the BIOS to prevent any potential conflicts. 

Anyone have any ideas? I can't quite put a finger on it. 

tnx and 73

Stephen

K1LNX

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic