Not sure if it's the same issue, but I had a similar experience with my BB-XM and LOX. Turned out it was my memory card. After reseating the micro SD, I've had no issues for a few months now. My BBB/URIx has been up and running on the original build for a long time now, without issue.

Thanks,

Bob

kk6ecm

Sent from iPad

On May 18, 2015, at 8:22 AM, Mike Lussier <mike.lussier@gmail.com> wrote:

I have havd several all star nodes up and running using the DMK URIx interfaces each connected to thier own BeagleBone Black. Normally I see the green light on the URIx blinking at me. In the past few months I have seen where the light stops blinking. some times pulling the USB for 10 seconds and plugging it back in solves the problem. worse case a full reboot of the system. . now its only getting worse instead of better. and almost daily issue. I thought about the watchdog idea. but it monitors the read write to a file if I remember correctly. is it possible to rewrite the watchdog to monitor the pulses of the URI instead and act on the loss of pulses from the URI

Mike AE4ML

"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.