Thanks! Appreciate the response.
Each TLB instance only has ONE Asterisk connection - it just happens
that I have two Asterisk nodes on the same server (for now).
It seems like Asterisk is losing its (or doesn't have an)
association between which TLB stream (they are on different port
pairs) is associated with which Asterisk node. Traffic from
either/both Asterisk nodes gets sent out to ALL TLB streams... even
though it's spec'd which node to associate with - almost feels like
it's not being checked going from Asterisk out and over to TLB...
- Jeremy, KD0EAV
On 12/7/10 4:11 PM, Jim Duuuude wrote:
[In Yoda voice... mmmmm, very peculiar configuration, this is]
I believe the issue is with TLB. I dont think it can deal with
more then 1 Asterisk station connecting to it
from the same IP address to the same UDP port. I believe that why
it supports multiple "listen" ports.
Try defining 2 UDP ports (in a comma delimited list (or
something), I believe) in the tlb.conf
for each node, and have a unique entry for each node to connect to
a different UDP port on
the TLB system. I think this may fix your problem.
I really am no expert on TLB things.
JIM WB6NIL
Date: Tue, 7 Dec 2010 15:55:33 -0600
From: kd0eav@clear-sky.net
To: app_rpt-users@qrvc.com
Subject: [App_rpt-users] chan_tlb - Cross-Talk Issues
I've been working on setting up two TLB conferences that I wish to
bridge over into two Allstar Link nodes ...
I've been successful at attaching both of the conferences to their
two separate Allstar nodes. My intention is to have them run
exclusively of each other - with the ability to bridge the Allstar
nodes together as needed.
They are currently spread between two servers (and 3 IP
addresses)...
____Server 1_________________
Allstar 27097
Allstar 27521
TLB - Echolink *KD0EAV* (attached to 27097)
____Server 2_________________
TLB - Echolink *MISSOURI* (attached to 27521)
The issue is that when I have both 27097 and 27521 on the same
server, ANY traffic from 27097 will appear on the *MISSOURI*
conference (only attached to 27521)... and any traffic on 27521
will appear on *KD0EAV* (only attached to 27097)... even though
they ARE NOT in ANY WAY bridged together. BUT - this is only true
for traffic which is on the AllStar side of things... if somebody
responds to me on the TLB conference it is NOT routed back over.
It only flows one way... FROM Allstar TO TLB... It shows in TLB to
be from the other Asterisk node.
____Server 1 Allstar tlb.conf_______
[tlb0]
call=Allstar 27097 ; Call of the app_rpt station
port=44966 ; Start of UDP port range (this port,
port + 1)
astnode=27097 ; app_rpt node associated with this
instance (for incoming connections)
context=radio-secure ; Asterisk context for incoming
connections
codec=GSM ; Default CODEC to be used
ipaddr=208.110.93.103 ; Bind2IP address
[tlb1]
call=Allstar 27521 ; Call of the app_rpt station
port=44968 ; Start of UDP port range (this port,
port + 1)
astnode=27521 ; app_rpt node associated with this
instance (for incoming connections)
context=radio-secure ; Asterisk context for incoming
connections
codec=GSM ; Default CODEC to be used
ipaddr=208.110.93.103 ; Bind2IP address
[nodes]
1424491 = *KD0EAV*,208.110.93.108,44966
1452514 = *MISSOURI*,216.229.80.7,44968
____Server 1 TLB tlb.conf__________
Bind2IP = 208.110.93.108
RTP_Port = 44966
StartupCmd = connect -r -n -f -p 44966 208.110.93.103
____Server 2 TLB tlb.conf__________
Bind2IP = 216.229.80.7
RTP_Port = 44968
StartupCmd = connect -r -n -f -p 44968 208.110.93.103
Thanks for all your work on this!! It held up to quite a lot of
abuse last night....
73
- Jeremy, KD0EAV
_______________________________________________
App_rpt-users mailing list
App_rpt-users@qrvc.com
http://qrvc.com/mailman/listinfo/app_rpt-users